After determining the most secure measurement for your trailer, the ONESTEP easily slides into place and can be set, locked, and removed from a standing position. It is considerably faster and easier to use than chocks that require ratcheting, saving you time and hassle.

To set the ONESTEP into place, drop it in a collapsed position between your tires, and simply step down in the center. This will flatten the arms against the ground and press the steel sides firmly against each tire, preventing unwanted rocking and rolling. To remove, pull the attached cable upward. The arms will easily release, allowing you to remove it from between your tires.

SPECIFICATIONS

Standard ONEstep Chock:

• Fits Tandem Axle trailers with typical axle spacing & suspension.
• Powder coated scissor arms.
• Zinc plated wedges.
• UV resistant coated cable handle.
• Minimum length (wedge tip to wedge tip): 16 inches.
• Maximum length (wedge tip to wedge tip): 24 inches.
• Warranty: Limited 1 year.

ONEstep XL Chock:

• Fits Tandem Axle trailers with extended or “Wide –track” suspensions.
• Powder coated scissor arms.
• Zinc plated wedges.
• UV resistant coated cable handle.
• Minimum length (wedge tip to wedge tip): 16 inches.
• Maximum length (wedge tip to wedge tip): 30 inches.
• Warranty: Limited 1 year.