Products ❯
CONNECT™ Hitch

The Fastway CONNECT™ gives you a safer tow by providing a smooth, level ride with weight distribution. It allows you to tow at the maximum conventional towing capacity of your vehicle by creating a bridge between your tow vehicle and trailer. Proper weight distribution provides better braking, steering, and helps reduce tow vehicle sag. Weight distribution is the act of restoring balance to the tow vehicle. The Fastway CONNECT acts like a bridge that alleviates the load being put on the rear axle and distributes it back to the front axle of the tow vehicle.

Related Products

1 7/8″ Thin-walled socket

1 7/8″ Thin-walled socket

SKU: 70-00-4800 Thin-walled 1-7/8″ socket for installing the hitch ball in an Equal-i-ze...

This shank is for use with a No Shank Equal-i-zer weight distribution system.

This shank is for use with a No Shank Equal-i-zer weight distribution system.

2″ Shank for 400/4000 lb. Hitch

2″ Shank for 400/4000 lb. Hitch

This shank is made to fit 400/4,000 Equal-i-zer Sway Control hitches.

The 4K pin is specially made for the 400/4,000 lb Equal-i-zer hitch model.

The angle set bolt is a single bolt underneath the hitch head that, when kept tight, unifies th...

Double Spare Pin Pack

Double Spare Pin Pack

Double Set of replacement pins and clips for the Equal-i-zer hitch.

e2™ Bolt Pack

The e2™ hitch bolt pack includes all the necessary hardware for the e2 hitch head.

For the best and safest towing experience, you need the e2™ hitch, providing you with faster and e

e2™ Inside Link Plate

e2™ Inside Link Plate

The e2™ hitch Inside Link Plate is the part of the sway bracket that is installed on the inside

e2™ L-bracket

The e2™ hitch L bracket mounts to the outside link plate (93-02-5350) on the trailer frame.

The L pin ensures your spring arms stay firmly attached to your trailer frame.