The following tools will allow you to install the hitch properly:

• 1-1/8” Box-end wrench (Shank Bolts)
• 1-1/8” Socket wrench (Shank Bolts)
• 3/4” Box-end or socket wrench (Link Plates and L-brackets)
• 5/8” Socket or box-end wrench (Angle Set Bolt)
• Measuring tape
• Pencil
• Torque wrench capable of 320 ft-lbs of torque. (Shank Bolts)
• Torque wrench capable of 75 ft-lbs of torque. (Sway Bracket Assembly)

Recommended tools for installing the Hitch Ball:

• 1-7/8” Thin-wall socket (available from Progress Mfg. Inc.)
• Torque Wrench capable of 430 ft-lbs of torque (or higher if hitch ball manufacturer specifies).