Details

Weight Distribution & Sway Control Hitch

The Equal-i-zer is made in the USA and offers best-in-class sway control and weight distribution.

Weight Distribution Keeps you Safe

Have you ever driven by a vehicle towing a trailer and noticed the trailer tongue or back of the tow vehicle sagging? Without weight distribution, the trailer’s tongue weight added to the tow vehicle can cause it to “teeter-totter” over the rear axle which lifts the weight off the front wheels. This can cause a serious loss of steering and braking control, and can also contribute to a setup that is more likely to sway.

The Equal-i-zer hitch’s weight distributing design effectively transfers trailer tongue weight to all the axles and helps keep the front of the tow vehicle firmly on the road.

Without an Equal

The Equal-i-zer hitch keeps you safer than any other trailer hitch on the market, helping you tow with confidence and ease. Ball mounts and other weight distribution hitches fall short. They don’t provide the same level of sway control and weight distribution needed for passing semi trucks, unexpected quick braking, and driving in crosswinds or bad weather.

The Equal-i-zer hitch gives you a safer ride by providing both sway control and weight distribution. This provides better steering, braking, and sway control, which help eliminate stressful driving situations and work to keep your family and your investment safe on the road.

Industry Leading Sway Control Hitch

The Equal-i-zer is made in the USA and offers best-in-class sway control and weight distribution.

Points 1-2: The Patented Equal-i-zer Hitch Head

The patented Equal-i-zer hitch head creates two powerful points of rotational friction that work to stop side-to-side sway before it starts. The sway control is activated by downward pressure from the trailer tongue and upward pressure on the spring arms. The spring arms link the hitch head to the sway control brackets and distribute trailer tongue weight. The tension of the hitch head pinching the two spring arm sockets are the points of friction that effectively hold the trailer in line behind the tow vehicle and combat sway.

Points 3-4: Rigid Trailer Brackets

The Equal-i-zer hitch’s unique rigid bracket design provides two additional integrated friction sway control points. These friction points are activated by loading the spring arms. The Equal-i-zer’s rigid brackets eliminate the unwanted side-to-side spring bar movement. Equal-i-zer’s original design, combined with the stability added by the rigid brackets, makes it the best protection for your journey.

Our Integrated 4 Point Sway Control provides the highest level of resistance against sway. There is no other hitch on the market that offers as much sway control as the Equal-i-zer.

Integrated Sway Control Provides a Safer, More Comfortable Ride

The Equal-i-zer hitch eliminates the need for add-on sway control devices and the hassle that goes along with them. With an Equal-i-zer hitch, you don’t have to worry about restrictions on backing up or a tight turning radius. There’s nothing extra to hook up or take off. When the weight distribution is engaged, the sway control is engaged too, providing your family the best protection possible.

Specifications

See the table below for specification information by SKU. Click on an SKU in the table to load that model.

All models:

Pre-Installed Hitch Ball Size: 2-5/16″ hitch ball on all models, except the 90-00-0400 (4,000 lb model)
Shank Length: 12″ (optional / when selected)
Sway Control Bracket Positioning: 27″ – 32″ back from center of coupler

Model Number	Max Tongue Weight	Max Gross Towing Weight	Max Trailer Frame Height	Maximum Rise	Maximum Drop	Spring-bar Dimensions
90-00-0400	400 lb	4,000 lb	6″	7″ from top of hitch receiver opening	3″ from top of hitch receiver opening	36″ long x 1″ wide
90-00-0600	600 lb	6,000 lb	6″	7″ from top of hitch receiver opening	3″ from top of hitch receiver opening	36″ long x 1-1/4″ wide
90-00-1000	1,000 lb	10,000 lb	6″	7″ from top of hitch receiver opening	3″ from top of hitch receiver opening	36″ long x 1-3/8″ wide
90-00-1200	1,200 lb	12,000 lb	6″	7″ from top of hitch receiver opening	3″ from top of hitch receiver opening	36″ long x 1-1/2″ wide
90-00-1400	1,400 lb	14,000 lb	6″	7″ from top of hitch receiver opening	3″ from top of hitch receiver opening	36″ long x 1-1/2″ wide
90-00-1600	1,600 lb	16,000 lb	8″	5.9″ from top of hitch receiver opening	2.9″ from top of hitch receiver opening	35.5″ long x 1-1/2″ wide

What’s Included

Weight Distribution Shank
Patented Weight Distribution Head
2 Sway Control Brackets
2 Spring Bars
2-5/16″ Pre-installed hitch ball on all models except 90-00-0400
Snap-up Lever
Spacer Rivet and Washers
Hitch Pin and Clip
Necessary Installation Hardware
Limited Lifetime Warranty

Using the Equal-i-zer hitch is easy, every time.

The Equal-i-zer® hitch is simple and easy to use. With Integrated Sway Control™ there is no need for add-on sway control devices. Hitching and unhitching are easily done from any angle. Install, adjustment, and hitch up are easy too!

Inclement Weather

Other hitches require you to loosen and even remove sway control bars in inclement weather. The Equal-i-zer hitch’s Integrated Sway Control gives you permanent sway control. When the rain begins to fall and the wind starts to blow, you will have peace of mind, knowing your Equal-i-zer hitch is working to eliminate sway and keep your family safe in all weather conditions.

Backing and Turning

With an Equal-i-zer hitch, you don’t have to worry about restrictions on backing up or a tight turning radius. This makes it simple and easy to back into camping spots, and navigate around gas pumps or other areas with tight turns.

A Custom Fit for All Trailers

The Equal-i-zer hitch is engineered to work with virtually all bumper-pull trailers, including RV, horse, cargo, boat, and utility trailers, including trailers with surge brakes.

The Equal-i-zer hitch’s 4-Point Sway Control™ brackets bolt directly on the trailer frame without drilling. This unique design of the sway control brackets allow flexible placement on the trailer frame. This provides ease of installation around tongue jacks, propane tanks and other items bolted to the trailer frame. Our standard trailer brackets fit up to a 6″ trailer frame. We also have brackets for 4-3/8″, 8″ and 10″ frames to accommodate BAL Norco frames, newer lightweight aluminum, or tall I-beam trailer frames.

Equal-i-zer shanks are available in a variety of sizes which provides a custom fit for virtually every receiver height. Visit our Shank Sizes page to find out which shank is best for you.

Learn how to choose the correct Equal-i-zer hitch model for your set up, by reading: Which Equal-i-zer Hitch Model Do I Need?

If you have questions about your unique trailer application, please feel free to contact us.

Why Should You Purchase an Equal-i-zer Hitch?

Free OnTarget Tool With Purchase!